SB2 is a Thunder board


1. powercycle comamnd syntax
----------------------------

	powercycle -- powers cycle the named server board

	Usage: powercycle <board> ...
	       powercycle -h

	    board -- the board name, typically SB0, SB1, ...

	    -h -- display this help message

2. Example command execution output
-----------------------------------

2.1 Thunder host is not powered on/active

	SC> powercycle sb2
	SB2: power cycled
	SC>

2.2 Thunder host is powered on/active

	SC> powercycle sb2
	SB2: This command will power cycle (off then on) the server board at SB2.
	SB2: The server board should not be power cycled while it's still active.
	SB2: Data loss may occur.
	SB2: Do you want to forcefully power cycle? [no] no
	SC>