--- ssh_config.0 Tue Jan 16 13:23:28 2007 +++ ssh_config.0.banner Tue Jan 16 14:25:00 2007 @@ -1,530 +1,540 @@ File Formats ssh_config(4) NAME ssh_config - ssh configuration file SYNOPSIS /etc/ssh/ssh_config $HOME/.ssh/config DESCRIPTION The first ssh_config path, above, provides the system-wide defaults for ssh(1). The second version is user-specific defaults for ssh. ssh obtains configuration data from the following sources (in this order): command line options, user's configuration file ($HOME/.ssh/config), and system-wide configuration file (/etc/ssh/ssh_config). For each parameter, the first obtained value will be used. The configuration files contain sections bracketed by Host specifications, and that section is applied only for hosts that match one of the patterns given in the specification. The matched host name is the one given on the command line. Since the first obtained value for each parameter is used, host-specific declarations should be given near the begin- ning of the file, and general defaults at the end. For each parameter, the first obtained value will be used. The configuration files contain sections bracketed by "Host" specifications. A given section is applied only for hosts that match one of the patterns given in the specification. The matched host name is the one given on the command line. Because the first obtained value for each parameter is used, more host-specific declarations should be given near the beginning of the file and general defaults at the end. The configuration file has the following format and syntax: o Empty lines and lines starting with # are comments. o Non-commented lines are of the form: keyword arguments o Configuration options can be separated by whitespace or optional whitespace and exactly one equal sign. The latter format allows you to avoid the need to quote whitespace when specifying configuration options using the -o option to ssh, scp, and sftp. SunOS 5.10 Last change: 21 Aug 2006 1 File Formats ssh_config(4) The possible keywords and their meanings are listed below. Note that keywords are case-insensitive and arguments are case-sensitive. BatchMode The argument must be yes or no. If set to yes, passphrase/password querying will be disabled. This option is useful in scripts and other batch jobs where you have no user to supply the password. BindAddress Specify the interface to transmit from on machines with multiple interfaces or aliased addresses. Note that this option does not work if UsePrivilegedPort is set to yes. CheckHostIP If this flag is set to yes, ssh will additionally check the host IP address in the known_hosts file. This allows ssh to detect if a host key changed due to DNS spoofing. If the option is set to no, the check will not be exe- cuted. Cipher Specifies the cipher to use for encrypting the session in protocol version 1; blowfish and 3des are the only valid values. Ciphers Specifies the ciphers allowed for protocol version 2 in order of preference. Multiple ciphers must be comma- separated. The default is: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc ClearAllForwardings SunOS 5.10 Last change: 21 Aug 2006 2 File Formats ssh_config(4) Specifies that all local, remote, and dynamic port for- wardings specified in the configuration files or on the command line be cleared. This option is primarily useful when used from the ssh command line to clear port for- wardings set in configuration files and is automatically set by scp(1) and sftp(1). The argument must be yes or no. The default is no. Compression Specifies whether to use compression. The argument must be yes or no. Defaults to no. CompressionLevel Specifies the compression level to use if compression is enabled. The argument must be an integer from 1 (fast) to 9 (slow, best). The default level is 6, which is good for most applications. kNote that this option applies to protocol version 1 only. ConnectionAttempts Specifies the number of tries (one per second) to make before falling back to rsh or exiting. The argument must be an integer. This can be useful in scripts if the con- nection sometimes fails. The default is 1. + DisableBanner + + If set to "yes" it disables the display of banner + message. If set to "in-exec-mode" it disables the + display of banner message when in remote command mode + only. Default value is "no" which means that by default + the banner is displayed every time. See also Banner + option in sshd_config(5). This option applies to + protocol version 2 only. + DynamicForward Specifies that a TCP/IP port on the local machine be forwarded over the secure channel. The application pro- tocol is then used to determine where to connect to from the remote machine. The argument must be a port number. Currently the SOCKS4 protocol is supported, and ssh will act as a SOCKS4 server. Multiple forwardings can be specified and additional forwardings can be specified on the command line. Only the superuser can forward privileged ports. EscapeChar SunOS 5.10 Last change: 21 Aug 2006 3 File Formats ssh_config(4) Sets the escape character. The default is tilde (~). The escape character can also be set on the command line. The argument should be a single character, ^, followed by a letter, or none to disable the escape character entirely (making the connection transparent for binary data). FallBackToRsh Specifies that if connecting with ssh fails due to a connection refused error (there is no sshd(8) listening on the remote host), rsh(1) should automatically be used instead (after a suitable warning about the session being unencrypted). The argument must be yes or no. ForwardAgent Specifies whether the connection to the authentication agent (if any) will be forwarded to the remote machine. The argument must be yes or no. The default is no. Agent forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the agent's Unix-domain socket) can access the local agent through the forwarded connection. An attacker cannot obtain key material from the agent, however he can perform operations on the keys that enable him to authenticate using the identities loaded into the agent. ForwardX11 Specifies whether X11 connections will be automatically redirected over the secure channel and DISPLAY set. The argument must be yes or no. The default is no. X11 forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the user's X authorization database) can access the local X11 display through the forwarded connection. An attacker might then be able to perform activities such as keystroke monitoring. SunOS 5.10 Last change: 21 Aug 2006 4 File Formats ssh_config(4) GatewayPorts Specifies whether remote hosts are allowed to connect to local forwarded ports. By default, ssh binds local port forwardings to the loopback address. This prevents other remote hosts from connecting to forwarded ports. GatewayPorts can be used to specify that ssh should bind local port forwardings to the wildcard address, thus allowing remote hosts to connect to forwarded ports. The argument must be yes or no. The default is no. GlobalKnownHostsFile Specifies a file to use instead of /etc/ssh/ssh_known_hosts. GSSAPIAuthentication Enables/disables GSS-API user authentication. The default is yes. GSSAPIDelegateCredentials Enables/disables GSS-API credential forwarding. The default is no. GSSAPIKeyExchange Enables/disables GSS-API-authenticated key exchanges. The default is yes. This option is intended primarily to allow users to dis- able the use of GSS-API key exchange for SSHv2 when it would otherwise be selected and then fail (due to server misconfiguration, for example). SSHv2 key exchange failure always results in disconnection. This option also enables the use of the GSS-API to authenticate the user to the server after the key exchange. Note that GSS-API key exchange can succeed but the subsequent authentication using the GSS-API fail if the server does not authorize the user's GSS principal name to the target user account. SunOS 5.10 Last change: 21 Aug 2006 5 File Formats ssh_config(4) GSSAPIStoreDelegatedCredentials Controls whether sshd(1M) stores any GSS-API credentials delegated by clients. Host Restricts the following declarations (up to the next Host keyword) to be only for those hosts that match one of the patterns given after the keyword. An asterisk (*) and a question mark (?) can be used as wildcards in the patterns. A single asterisk as a pattern can be used to provide global defaults for all hosts. The host is the host name argument given on the command line (that is, the name is not converted to a canonicalized host name before matching). HostbasedAuthentication Specifies whether to try rhosts-based authentication with public key authentication. The argument must be yes or no. The default is no. This option applies to proto- col version 2 only and is similar to RhostsRSAAuthenti- cation. HostKeyAlgorithms Specifies the protocol version 2 host key algorithms that the client wants to use in order of preference. The default for this option is: ssh-rsa,ssh-dss. HostKeyAlias Specifies an alias that should be used instead of the real host name when looking up or saving the host key in the host key database files. This option is useful for tunneling ssh connections or for multiple servers run- ning on a single host. HostName Specifies the real host name to log into. This can be SunOS 5.10 Last change: 21 Aug 2006 6 File Formats ssh_config(4) used to specify nicknames or abbreviations for hosts. Default is the name given on the command line. Numeric IP addresses are also permitted (both on the command line and in HostName specifications). IdentityFile Specifies a file from which the user's RSA or DSA authentication identity is read. The default is $HOME/.ssh/identity for protocol version 1 and $HOME/.ssh/id_rsa and $HOME/.ssh/id_dsa for protocol version 2. Additionally, any identities represented by the authentication agent will be used for authentica- tion. The file name can use the tilde syntax to refer to a user's home directory. It is possible to have multiple identity files specified in configuration files; all these identities will be tried in sequence. KeepAlive Specifies whether the system should send TCP keepalive messages to the other side. If they are sent, death of the connection or crash of one of the machines will be properly noticed. However, this means that connections die if the route is down temporarily, which can be a source of annoyance. The default is yes (to send keepalives), which means the client notices if the network goes down or the remote host dies. This is important in scripts, and many users want it too. To disable keepalives, the value should be set to no in both the server and the client configura- tion files. LocalForward Specifies that a TCP/IP port on the local machine be forwarded over the secure channel to a given host:port from the remote machine. The first argument must be a port number, and the second must be host:port. IPv6 addresses can be specified with an alternative syntax: host/port. Multiple forwardings can be specified and additional forwardings can be given on the command line. Only the superuser can forward privileged ports. SunOS 5.10 Last change: 21 Aug 2006 7 File Formats ssh_config(4) LogLevel Gives the verbosity level that is used when logging mes- sages from ssh. The possible values are: FATAL, ERROR, QUIET, INFO, VERBOSE, DEBUG, DEBUG1, DEBUG2, and DEBUG3. The default is INFO. DEBUG and DEBUG1 are equivalent. DEBUG2 and DEBUG3 each specify higher levels of verbose output. MACs Specifies the MAC (message authentication code) algo- rithms in order of preference. The MAC algorithm is used in protocol version 2 for data integrity protection. Multiple algorithms must be comma-separated. The default is hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96. NoHostAuthenticationForLocalhost This option can be used if the home directory is shared across machines. In this case localhost will refer to a different machine on each of the machines and the user will get many warnings about changed host keys. However, this option disables host authentication for localhost. The argument to this keyword must be yes or no. The default is to check the host key for localhost. NumberOfPasswordPrompts Specifies the number of password prompts before giving up. The argument to this keyword must be an integer. The default is 3. PasswordAuthentication Specifies whether to use password authentication. The argument to this keyword must be yes or no. Note that this option applies to both protocol versions 1 and 2. The default is yes. Port SunOS 5.10 Last change: 21 Aug 2006 8 File Formats ssh_config(4) Specifies the port number to connect on the remote host. The default is 22. PreferredAuthentications Specifies the order in which the client should try pro- tocol 2 authentication methods. This allows a client to prefer one method (for example, keyboard-interactive) over another method (for example, password). The default for this option is: hostbased,publickey,keyboard- interactive,password. Protocol Specifies the protocol versions ssh should support in order of preference. The possible values are 1 and 2. Multiple versions must be comma-separated. The default is 2,1. This means that ssh tries version 2 and falls back to version 1 if version 2 is not available. ProxyCommand Specifies the command to use to connect to the server. The command string extends to the end of the line, and is executed with /bin/sh. In the command string, %h is substituted by the host name to connect and %p by the port. The string can be any valid command, and should read from its standard input and write to its standard output. It should eventually connect an sshd(1M) server running on some machine, or execute sshd -i somewhere. Host key management will be done using the HostName of the host being connected (defaulting to the name typed by the user). Note that CheckHostIP is not available for connects with a proxy command. PubkeyAuthentication Specifies whether to try public key authentication. The argument to this keyword must be yes or no. The default is yes. This option applies to protocol version 2 only. SunOS 5.10 Last change: 21 Aug 2006 9 File Formats ssh_config(4) RemoteForward Specifies that a TCP/IP port on the remote machine be forwarded over the secure channel to a given host:port from the local machine. The first argument must be a port number, and the second must be host:port. IPv6 addresses can be specified with an alternative syntax: host/port. You can specify multiple forwardings and give additional forwardings on the command line. Only the superuser can forward privileged ports. RhostsAuthentication Specifies whether to try rhosts-based authentication. Note that this declaration affects only the client side and has no effect whatsoever on security. Disabling rhosts authentication can reduce authentication time on slow connections when rhosts authentication is not used. Most servers do not permit RhostsAuthentication because it is not secure (see RhostsRSAAuthentication). The argument to this keyword must be yes or no. This option applies only to the protocol version 1 and requires that ssh be setuid root and that UsePrivilegedPort be set to yes. RhostsRSAAuthentication Specifies whether to try rhosts-based authentication with RSA host authentication. This is the primary authentication method for most sites. The argument must be yes or no. This option applies only to the protocol version 1 and requires that ssh be setuid root and that UsePrivilegedPort be set to yes. StrictHostKeyChecking If this flag is set to yes, ssh will never automatically add host keys to the $HOME/.ssh/known_hosts file, and will refuse to connect hosts whose host key has changed. This provides maximum protection against trojan horse attacks. However, it can be a source of inconvenience if you do not have good /etc/ssh/ssh_known_hosts files installed and frequently connect new hosts. This option forces the user to manually add any new hosts. Normally this option is disabled, and new hosts will automati- cally be added to the known host files. The host keys of SunOS 5.10 Last change: 21 Aug 2006 10 File Formats ssh_config(4) known hosts will be verified automatically in either case. The argument must be yes or no or ask. The default is ask. UsePrivilegedPort Specifies whether to use a privileged port for outgoing connections. The argument must be yes or no. The default is yes. Note that setting this option to no turns off RhostsAuthentication and RhostsRSAAuthentication. If set to yes ssh must be setuid root. Defaults to no. User Specifies the user to log in as. This can be useful if you have different user names on different machines. This saves you the trouble of having to remember to enter the user name on the command line. UserKnownHostsFile Specifies a file to use instead of $HOME/.ssh/known_hosts. UseRsh Specifies that rlogin or rsh should be used for this host. It is possible that the host does not support the ssh protocol. This causes ssh to immediately execute rsh(1). All other options (except HostName) are ignored if this has been specified. The argument must be yes or no. XAuthLocation Specifies the location of the xauth(1) program. The default is /usr/openwin/bin/xauth. SEE ALSO SunOS 5.10 Last change: 21 Aug 2006 11 File Formats ssh_config(4) ssh(1), ssh-http-proxy-connect(1), ssh-socks5-proxy- connect(1), sshd(1M), sshd_config(4), kerberos(5) SunOS 5.10 Last change: 21 Aug 2006 12