14c14
< 	 [-d | -e | -u | -L | -l controller_number]
---
> 	 [-D fp|mpt|iscsi -d | -e | -u | -L | -l controller_number]
48,49c48,49
< 	 Enables Solaris I/O multipathing on  all  fibre  channel
< 	 (fp(7D))  controller ports. Following this enabling, you
---
> 	 Enables Solaris I/O multipathing on  all multipath-capable 
> 	 (fp(7D)|mpt(7D)|iscsi) controller ports. Following this enabling, you
57,58c57,58
< 	 Disables Solaris I/O multipathing on all  fibre  channel
< 	 (fp(7D)) controller ports. Following this disabling, you
---
> 	 Disables Solaris I/O multipathing on all multipath-capable 
> 	 (fp(7D)|mpt(7D)|iscsi) controller ports. Following this disabling, you
82c82
< 	 multipathing enabled or disabled on specific fp(7D) con-
---
> 	 multipathing enabled or disabled on specific (fp(7D)|mpt(7D)|iscsi) con-
154a155,162
>      iscsi controller ports, enter:
> 
> 
>        # stmsboot -D iscsi -e
> 
> 
> 
>      To	enable	Solaris	 I/O  Multipathing  on	multipath-capable
183a192,199
>      iscsi controller  ports, enter:
> 
> 
>        # stmsboot -D iscsi -d
> 
> 
> 
>      To	disable	Solaris	 I/O  multipathing  on	multipath-capable
224a241,243
>      A similar procedure involving the /kernel/drv/iscsi.conf  file
>      should  be	 followed  for	devices	 attached by means of the
>      iscsi driver.
226d244
<