SRP I/O Controller Profile Values for COMSTAR SRP Target

=========================
(cf Table B.7 in Annex B of SRP Spec)
Table B.7 - IOControllerProfile attributes for SRP target ports
Field				SRP requirement
I/O Class			0100h
I/O Subclass			609Eh
Protocol			0108h
Protocol Version		0001h
Service Connections		NOT USED
Initiators Supported		NOT USED
Send Message Depth		(128)
RDMA Read Depth			Maximum IOC-issued RDMA depth (from HCA)
Send Message Size		MAXIMUM INITIATOR TO TARGET IU SIZE (996)
RDMA Transfer Size		(65536)
Controller Operations Capability Mask:
0: ST; Send Messages To IOCs		1
1: SF; Send Messages From IOCs		1
2: RT; RDMA Read Requests To IOCs	 0
3: RF; RDMA Read Requests From IOCs	1
4: WT; RDMA Write Requests To IOCs	 0
5: WF; RDMA Write Requests From IOCs	1
6: AT; Atomic Operations To IOCs	 0
7: AF; Atomic Operations From IOCs	 0
Controller Services Capability Mask	NOT USED
Service Entries			1 if SRP is enabled on this HCA


=========================
(cf Table B.8 in Annex B of SRP spec)
Table B.8 - ServiceEntries attribute pair for SRP target ports

Field		Length (bits)	SRP requirement
ServiceName_n	320		"SRP.T10:xxxxxxxxxxxxxxxx"
				or
				"SRP.T10:xxxxxxxxxxxxxxxx:reserved"
ServiceID_n	64		Assigned by the IB I/O controller

For the COMSTAR SRP target, there will be one IOC per HCA, and one
ServiceEntry per IOC.  In this Service Entry, the xxxxxxxxxxxxxxx in
the above will represent the HCA-GUID.